Have you been noticing a steady rise in the humidity level of your home? If yes, it could mean that your house needs to get insulated or reinsulated. The rooms might either be too cold or too hot. It is caused due to air leaks in the roof and attic from where the outside air enters your home, making the temperature uneven and increasing the humidity level of your home. When your furnace gets old, it can be more difficult to push heat evenly throughout your home. Even water can enter and create moisture inside the home. Insulation To Protect Your Home
How to Identify Moisture in Your House?
- Did you notice any ice frost on roofs?
- Rusting on roof nails inside the attic or on the roof
- Increase in the level of moisture inside your home
- Drip marks on the attic floor/walls
- Molds in attic or roof
How to Prevent Excess Moisture?
There are many ways to control moisture in your home. Firstly, to control the moisture level in your home you need to get the leakage areas fixed. If water is entering the house from outside, the level of moisture will keep rising. Get your home insulated because it makes the airflow better and seals unwanted holes.
Insulation is a much better option for preventing moisture as it is able to remove air leaks and also the impurities present in the air that are responsible for mold growth. Water leaks in pipes or around sinks can provide a place for biological pollutants to grow. To get rid of it you need to get it fixed by closing the air leaks before it goes out of hand. Therefore, invest in spray foam insulation to seal all the gaps and holes through which unwanted air might be entering your home.
With spray foam insulation, you will be able to seal all the tiny air leaks. This is because spray foam insulation expands into the holes and blocks them. Moreover, because it is moisture-impermeable, your home’s walls will become moisture-proof! No air leaks mean no humidity and no mold growth.
How to Identify Humidity Level in Your House?
If the humidity level in your home rises or your home is unevenly heated, it means that your home has air leaks and is not insulated properly. Even if you notice dry air within your home is also the cause of poor or no insulation. When your home is not insulated properly or your home’s insulation is too old, it can be more difficult to keep the outside air out of your home. These are some ways through which you can notice the humidity level in your home:
- Did you notice the uneven temperature in your home?
- Do you have a dry or runny nose?
- Catching cold or infection easily?
- Excessive sweating
- Noticing more Molds and spores inside the attic?
- Wood swell
How to Prevent Humidity Level?
These are some ways you can prevent humidity levels in your home:
- Get your home insulated as it seals the air leaks and does not let the outside air enter inside your home. Insulation is the best way to prevent humidity levels in your home. Insulation seals the attic and roof which helps to reduce humidity and makes the temperature in your home equally distributed.
- Replace your air filters regularly. As dirt gathers in it and the HVAC system starts working less efficiently and because of which the humidity level rises. To get rid of it, it’s a must to replace the filters regularly.
- Use exhaust fans in the kitchen and bathroom, as it prevents the moisture and humidity that is being released through steam.
For more information about our spray foam insulation services, feel free to contact Spray Foam Insulation Plus, the best insulation contractors in Savage MN, today.
Insulation To Protect Your Home
Insulation To Protect Your Home
Insulation To Protect Your Home
